Listed below are the release notes for the PDF Converter Services. If you have identified an issue that is not listed here then please check out the FAQ, Support Area or contact us directly.
Release notes are available for the following public releases:
Read the announcement to see what is new in this version. An overview of breaking changes / points of caution when upgrading from a previous version can be found in this Knowledge Base article.
Known issues of this version are:
As of version 7.0 the PDF Converter Professional add-on license allows a PDF to be optimised for use on the web (FastWebView / Linearization). This option cannot be used in combination with PDF Security and encryption.
Documents that have been encrypted and secured via IRM / DRM / RMS / AIP or similar soluions are not supported. For details see this Knowledge Base article.
InfoPath ships with a dialog box that allows the user to select which views (multiple) are printed when a form is sent to the printer. In InfoPath 2007 this functionality is ignored when generating PDF files, however in InfoPath 2010 these views are given priority over Muhimbi's own dynamic view selection functionality. If you wish to use Muhimbi's dynamic view selection features in combination with InfoPath 2010 then please make sure no views are selected in InfoPath's Print Multiple Views dialog. We hope to find a more permanent workaround for a next software release.
Excel sheets that contain no data cannot be converted to PDF format.
Read the announcement to see what is new in this version. An overview of breaking changes / points of caution when upgrading from a previous version can be found in this Knowledge Base article.
Known issues of this version are:
As of version 7.0 the PDF Converter Professional add-on license allows a PDF to be optimised for use on the web (FastWebView / Linearization). This option cannot be used in combination with PDF Security and encryption.
Documents that have been encrypted and secured via IRM / DRM / RMS / AIP or similar soluions are not supported. For details see this Knowledge Base article.
InfoPath ships with a dialog box that allows the user to select which views (multiple) are printed when a form is sent to the printer. In InfoPath 2007 this functionality is ignored when generating PDF files, however in InfoPath 2010 these views are given priority over Muhimbi's own dynamic view selection functionality. If you wish to use Muhimbi's dynamic view selection features in combination with InfoPath 2010 then please make sure no views are selected in InfoPath's Print Multiple Views dialog. We hope to find a more permanent workaround for a next software release.
Excel sheets that contain no data cannot be converted to PDF format.
Read the announcement to see what is new in this version. An overview of breaking changes / points of caution when upgrading from a previous version can be found in this Knowledge Base article.
Known issues of this version are:
As of version 7.0 the PDF Converter Professional add-on license allows a PDF to be optimised for use on the web (FastWebView / Linearization). This option cannot be used in combination with PDF Security and encryption.
Documents that have been encrypted and secured via IRM / DRM / RMS / AIP or similar soluions are not supported. For details see this Knowledge Base article.
InfoPath ships with a dialog box that allows the user to select which views (multiple) are printed when a form is sent to the printer. In InfoPath 2007 this functionality is ignored when generating PDF files, however in InfoPath 2010 these views are given priority over Muhimbi's own dynamic view selection functionality. If you wish to use Muhimbi's dynamic view selection features in combination with InfoPath 2010 then please make sure no views are selected in InfoPath's Print Multiple Views dialog. We hope to find a more permanent workaround for a next software release.
When using the beta version of Visio 2010 to convert Visio files that contain macros, the file will fail to convert. As a workaround remove the macro or use Visio 2007 to convert these kind of files.
Excel sheets that contain no data cannot be converted to PDF format.
Read the announcement to see what is new in this version. An overview of breaking changes / points of caution when upgrading from a previous version can be found in this Knowledge Base article.
Known issues of this version are:
As of version 7.0 the PDF Converter Professional add-on license allows a PDF to be optimised for use on the web (FastWebView / Linearization). This option cannot be used in combination with PDF Security and encryption.
Documents that have been encrypted and secured via IRM / DRM / RMS / AIP or similar soluions are not supported. For details see this Knowledge Base article.
InfoPath ships with a dialog box that allows the user to select which views (multiple) are printed when a form is sent to the printer. In InfoPath 2007 this functionality is ignored when generating PDF files, however in InfoPath 2010 these views are given priority over Muhimbi's own dynamic view selection functionality. If you wish to use Muhimbi's dynamic view selection features in combination with InfoPath 2010 then please make sure no views are selected in InfoPath's Print Multiple Views dialog. We hope to find a more permanent workaround for a next software release.
When using the beta version of Visio 2010 to convert Visio files that contain macros, the file will fail to convert. As a workaround remove the macro or use Visio 2007 to convert these kind of files.
Excel sheets that contain no data cannot be converted to PDF format.
Read the announcement to see what is new in this version. An overview of breaking changes / points of caution when upgrading from a previous version can be found in this Knowledge Base article.
Known issues of this version are:
As of version 7.0 the PDF Converter Professional add-on license allows a PDF to be optimised for use on the web (FastWebView / Linearization). This option cannot be used in combination with PDF Security and encryption.
Documents that have been encrypted and secured via IRM / DRM / RMS / AIP or similar soluions are not supported. For details see this Knowledge Base article.
InfoPath ships with a dialog box that allows the user to select which views (multiple) are printed when a form is sent to the printer. In InfoPath 2007 this functionality is ignored when generating PDF files, however in InfoPath 2010 these views are given priority over Muhimbi's own dynamic view selection functionality. If you wish to use Muhimbi's dynamic view selection features in combination with InfoPath 2010 then please make sure no views are selected in InfoPath's Print Multiple Views dialog. We hope to find a more permanent workaround for a next software release.
When using the beta version of Visio 2010 to convert Visio files that contain macros, the file will fail to convert. As a workaround remove the macro or use Visio 2007 to convert these kind of files.
Excel sheets that contain no data cannot be converted to PDF format.
Read the announcement to see what is new in this version. An overview of breaking changes / points of caution when upgrading from a previous version can be found in this Knowledge Base article.
Known issues of this version are:
As of version 7.0 the PDF Converter Professional add-on license allows a PDF to be optimised for use on the web (FastWebView / Linearization). This option cannot be used in combination with PDF Security and encryption.
Documents that have been encrypted and secured via Microsoft's DRM solution are not supported at this moment in time.
InfoPath ships with a dialog box that allows the user to select which views (multiple) are printed when a form is sent to the printer. In InfoPath 2007 this functionality is ignored when generating PDF files, however in InfoPath 2010 these views are given priority over Muhimbi's own dynamic view selection functionality. If you wish to use Muhimbi's dynamic view selection features in combination with InfoPath 2010 then please make sure no views are selected in InfoPath's Print Multiple Views dialog. We hope to find a more permanent workaround for a next software release.
When using the beta version of Visio 2010 to convert Visio files that contain macros, the file will fail to convert. As a workaround remove the macro or use Visio 2007 to convert these kind of files.
Excel sheets that contain no data cannot be converted to PDF format.
Read the announcement to see what is new in this version. An overview of breaking changes / points of caution when upgrading from a previous version can be found in this Knowledge Base article.
Known issues of this version are:
As of version 7.0 the PDF Converter Professional add-on license allows a PDF to be optimised for use on the web (FastWebView / Linearization). This option cannot be used in combination with PDF Security and encryption.
Documents that have been encrypted and secured via Microsoft's DRM solution are not supported at this moment in time.
InfoPath ships with a dialog box that allows the user to select which views (multiple) are printed when a form is sent to the printer. In InfoPath 2007 this functionality is ignored when generating PDF files, however in InfoPath 2010 these views are given priority over Muhimbi's own dynamic view selection functionality. If you wish to use Muhimbi's dynamic view selection features in combination with InfoPath 2010 then please make sure no views are selected in InfoPath's Print Multiple Views dialog. We hope to find a more permanent workaround for a next software release.
When using the beta version of Visio 2010 to convert Visio files that contain macros, the file will fail to convert. As a workaround remove the macro or use Visio 2007 to convert these kind of files.
MS-Word documents that contain this rare field code cause the converter to time out. To quickly check if a document contains such a field code, press CTRL-A to select all text and then press F9 to refresh all field codes. If a dialog box shows up asking for text to be entered then your document contains an ASK field code. Please remove it before conversion.
Excel sheets that contain no data cannot be converted to PDF format.
Read the announcement to see what is new in the latest release.
As of version 7.0 the PDF Converter Professional add-on license allows a PDF to be optimised for use on the web (FastWebView / Linearization). This option cannot be used in combination with PDF Security and encryption.
Documents that have been encrypted and secured via Microsoft's DRM solution are not supported at this moment in time.
InfoPath ships with a dialog box that allows the user to select which views (multiple) are printed when a form is sent to the printer. In InfoPath 2007 this functionality is ignored when generating PDF files, however in InfoPath 2010 these views are given priority over Muhimbi's own dynamic view selection functionality. If you wish to use Muhimbi's dynamic view selection features in combination with InfoPath 2010 then please make sure no views are selected in InfoPath's Print Multiple Views dialog. We hope to find a more permanent workaround for a next software release.
When using the beta version of Visio 2010 to convert Visio files that contain macros, the file will fail to convert. As a workaround remove the macro or use Visio 2007 to convert these kind of files.
MS-Word documents that contain this rare field code cause the converter to time out. To quickly check if a document contains such a field code, press CTRL-A to select all text and then press F9 to refresh all field codes. If a dialog box shows up asking for text to be entered then your document contains an ASK field code. Please remove it before conversion.
Excel sheets that contain no data cannot be converted to PDF format.
Read the announcement to see what is new in the latest release.
As of version 7.0 the PDF Converter Professional add-on license allows a PDF to be optimised for use on the web (FastWebView / Linearization). This option cannot be used in combination with PDF Security and encryption.
Documents that have been encrypted and secured via Microsoft's DRM solution are not supported at this moment in time.
InfoPath ships with a dialog box that allows the user to select which views (multiple) are printed when a form is sent to the printer. In InfoPath 2007 this functionality is ignored when generating PDF files, however in InfoPath 2010 these views are given priority over Muhimbi's own dynamic view selection functionality. If you wish to use Muhimbi's dynamic view selection features in combination with InfoPath 2010 then please make sure no views are selected in InfoPath's Print Multiple Views dialog. We hope to find a more permanent workaround for a next software release.
When using the beta version of Visio 2010 to convert Visio files that contain macros, the file will fail to convert. As a workaround remove the macro or use Visio 2007 to convert these kind of files.
MS-Word documents that contain this rare field code cause the converter to time out. To quickly check if a document contains such a field code, press CTRL-A to select all text and then press F9 to refresh all field codes. If a dialog box shows up asking for text to be entered then your document contains an ASK field code. Please remove it before conversion.
Excel sheets that contain no data cannot be converted to PDF format.
Read the announcement to see what is new in the latest release.
The installer carries out a number of checks to verify that MS-Office has been deployed on the server running the Conversion Service. At this moment the installer recognises Office 2007-2013 and will display a warning that Office was not found when using Office 2016. If Office 2016 is installed as per the Administration Guide, then this warning can be ignored.
The new installer currently doesn't support unattended installation. This will be introduced as part of version 8.1.
As of version 7.0 the PDF Converter Professional add-on license allows a PDF to be optimised for use on the web (FastWebView / Linearization). This option cannot be used in combination with PDF Security and encryption.
Documents that have been encrypted and secured via Microsoft's DRM solution are not supported at this moment in time.
InfoPath ships with a dialog box that allows the user to select which views (multiple) are printed when a form is sent to the printer. In InfoPath 2007 this functionality is ignored when generating PDF files, however in InfoPath 2010 these views are given priority over Muhimbi's own dynamic view selection functionality. If you wish to use Muhimbi's dynamic view selection features in combination with InfoPath 2010 then please make sure no views are selected in InfoPath's Print Multiple Views dialog. We hope to find a more permanent workaround for a next software release.
When using the beta version of Visio 2010 to convert Visio files that contain macros, the file will fail to convert. As a workaround remove the macro or use Visio 2007 to convert these kind of files.
MS-Word documents that contain this rare field code cause the converter to time out. To quickly check if a document contains such a field code, press CTRL-A to select all text and then press F9 to refresh all field codes. If a dialog box shows up asking for text to be entered then your document contains an ASK field code. Please remove it before conversion.
Excel sheets that contain no data cannot be converted to PDF format.
Read the announcement to see what is new in 7.3.
The PDF Converter's OCR add-on has the ability to recognise text in scanned PDF files and make these files fully searchable and indexable. Scanned content can be encoded in many different ways, but PDFs that use JPEG2000 encoding cannot be OCRed. As a workaround use the PDF Converter Professional to convert the PDF to an older PDF version that doesn't support JPEG2000 before sending it for OCR processing.
As of version 7.0 the PDF Converter Professional add-on license allows a PDF to be optimised for use on the web (FastWebView / Linearization). This option cannot be used in combination with PDF Security and encryption.
Although the PDF Conversion Service works fine on .NET 4.5 systems, the .NET Framework 3.0 / 3.5 needs to be installed for the installer to be able to run. The various copies of the .net framework can be installed at the same time and run in parallel.
When an InfoPath form contains a number of externally referenced large images then the PDF Conversion may be carried out before these images finish loading. As a workaround use smaller images or embed the images inside the InfoPath form.
Documents that have been encrypted and secured via Microsoft's DRM solution are not supported at this moment in time.
InfoPath ships with a dialog box that allows the user to select which views (multiple) are printed when a form is sent to the printer. In InfoPath 2007 this functionality is ignored when generating PDF files, however in InfoPath 2010 these views are given priority over Muhimbi's own dynamic view selection functionality. If you wish to use Muhimbi's dynamic view selection features in combination with InfoPath 2010 then please make sure no views are selected in InfoPath's Print Multiple Views dialog. We hope to find a more permanent workaround for a next software release.
The PDF Converter allows transparency settings to be specified for entire watermarks as well as individual watermark elements. Some PDF Readers do not always interpret transparency of elements correctly. You may need to move your transparency settings from the watermark container to the individual elements.
When using the beta version of Visio 2010 to convert Visio files that contain macros, the file will fail to convert. As a workaround remove the macro or use Visio 2007 to convert these kind of files.
MS-Word documents that contain this rare field code cause the converter to time out. To quickly check if a document contains such a field code, press CTRL-A to select all text and then press F9 to refresh all field codes. If a dialog box shows up asking for text to be entered then your document contains an ASK field code. Please remove it before conversion.
The MS-Word converter is the only converter with the ability to automatically generate PDF Bookmarks.
Although in general the converted InfoPath files look good, character spacing may be less than optimal. As a workaround try to use different fonts or a separate Print View.
Excel sheets that contain no data cannot be converted to PDF format.
Read the announcement to see what is new in 7.2 and 7.2.1.
The PDF Converter's OCR add-on has the ability to recognise text in scanned PDF files and make these files fully searchable and indexable. Scanned content can be encoded in many different ways, but PDFs that use JPEG2000 encoding cannot be OCRed. As a workaround use the PDF Converter Professional to convert the PDF to an older PDF version that doesn't support JPEG2000 before sending it for OCR processing.
As of version 7.0 the PDF Converter Professional add-on license allows a PDF to be optimised for use on the web (FastWebView / Linearization). This option cannot be used in combination with PDF Security and encryption.
Although the PDF Conversion Service works fine on .NET 4.5 systems, the .NET Framework 3.0 / 3.5 needs to be installed for the installer to be able to run. The various copies of the .net framework can be installed at the same time and run in parallel.
When an InfoPath form contains a number of externally referenced large images then the PDF Conversion may be carried out before these images finish loading. As a workaround use smaller images or embed the images inside the InfoPath form.
Documents that have been encrypted and secured via Microsoft's DRM solution are not supported at this moment in time.
InfoPath ships with a dialog box that allows the user to select which views (multiple) are printed when a form is sent to the printer. In InfoPath 2007 this functionality is ignored when generating PDF files, however in InfoPath 2010 these views are given priority over Muhimbi's own dynamic view selection functionality. If you wish to use Muhimbi's dynamic view selection features in combination with InfoPath 2010 then please make sure no views are selected in InfoPath's Print Multiple Views dialog. We hope to find a more permanent workaround for a next software release.
The PDF Converter allows transparency settings to be specified for entire watermarks as well as individual watermark elements. Some PDF Readers do not always interpret transparency of elements correctly. You may need to move your transparency settings from the watermark container to the individual elements.
When using the beta version of Visio 2010 to convert Visio files that contain macros, the file will fail to convert. As a workaround remove the macro or use Visio 2007 to convert these kind of files.
MS-Word documents that contain this rare field code cause the converter to time out. To quickly check if a document contains such a field code, press CTRL-A to select all text and then press F9 to refresh all field codes. If a dialog box shows up asking for text to be entered then your document contains an ASK field code. Please remove it before conversion.
The MS-Word converter is the only converter with the ability to automatically generate PDF Bookmarks.
Although in general the converted InfoPath files look good, character spacing may be less than optimal. As a workaround try to use different fonts or a separate Print View.
Excel sheets that contain no data cannot be converted to PDF format.
Read the announcement to see what is new in this version.
The PDF Converter's OCR add-on has the ability to recognise text in scanned PDF files and make these files fully searchable and indexable. Scanned content can be encoded in many different ways, but PDFs that use JPEG2000 encoding cannot be OCRed. As a workaround use the PDF Converter Professional to convert the PDF to an older PDF version that doesn't support JPEG2000 before sending it for OCR processing.
As of version 7.0 the PDF Converter Professional add-on license allows a PDF to be optimised for use on the web (FastWebView / Linearization). This option cannot be used in combination with PDF Security and encryption.
Although the PDF Conversion Service works fine on .NET 4.5 systems, the .NET Framework 3.0 / 3.5 needs to be installed for the installer to be able to run. The various copies of the .net framework can be installed at the same time and run in parallel.
When an InfoPath form contains a number of externally referenced large images then the PDF Conversion may be carried out before these images finish loading. As a workaround use smaller images or embed the images inside the InfoPath form.
Documents that have been encrypted and secured via Microsoft's DRM solution are not supported at this moment in time.
InfoPath ships with a dialog box that allows the user to select which views (multiple) are printed when a form is sent to the printer. In InfoPath 2007 this functionality is ignored when generating PDF files, however in InfoPath 2010 these views are given priority over Muhimbi's own dynamic view selection functionality. If you wish to use Muhimbi's dynamic view selection features in combination with InfoPath 2010 then please make sure no views are selected in InfoPath's Print Multiple Views dialog. We hope to find a more permanent workaround for a next software release.
The PDF Converter allows transparency settings to be specified for entire watermarks as well as individual watermark elements. Some PDF Readers do not always interpret transparency of elements correctly. You may need to move your transparency settings from the watermark container to the individual elements.
When using the beta version of Visio 2010 to convert Visio files that contain macros, the file will fail to convert. As a workaround remove the macro or use Visio 2007 to convert these kind of files.
MS-Word documents that contain this rare field code cause the converter to time out. To quickly check if a document contains such a field code, press CTRL-A to select all text and then press F9 to refresh all field codes. If a dialog box shows up asking for text to be entered then your document contains an ASK field code. Please remove it before conversion.
The MS-Word converter is the only converter with the ability to automatically generate PDF Bookmarks.
Although in general the converted InfoPath files look good, character spacing may be less than optimal. As a workaround try to use different fonts or a separate Print View.
Excel sheets that contain no data cannot be converted to PDF format.
Read the announcement to see what is new in this version.
As of version 7.0 the PDF Converter Professional add-on license allows a PDF to be optimised for use on the web (FastWebView / Linearization). This option cannot be used in combination with PDF Security and encryption.
Although the PDF Conversion Service works fine on .NET 4.5 systems, the .NET Framework 3.0 / 3.5 needs to be installed for the installer to be able to run. The various copies of the .net framework can be installed at the same time and run in parallel.
When an InfoPath form contains a number of externally referenced large images then the PDF Conversion may be carried out before these images finish loading. As a workaround use smaller images or embed the images inside the InfoPath form.
Documents that have been encrypted and secured via Microsoft's DRM solution are not supported at this moment in time.
InfoPath ships with a dialog box that allows the user to select which views (multiple) are printed when a form is sent to the printer. In InfoPath 2007 this functionality is ignored when generating PDF files, however in InfoPath 2010 these views are given priority over Muhimbi's own dynamic view selection functionality. If you wish to use Muhimbi's dynamic view selection features in combination with InfoPath 2010 then please make sure no views are selected in InfoPath's Print Multiple Views dialog. We hope to find a more permanent workaround for a next software release.
The PDF Converter allows transparency settings to be specified for entire watermarks as well as individual watermark elements. Some PDF Readers do not always interpret transparency of elements correctly. You may need to move your transparency settings from the watermark container to the individual elements.
When using the beta version of Visio 2010 to convert Visio files that contain macros, the file will fail to convert. As a workaround remove the macro or use Visio 2007 to convert these kind of files.
MS-Word documents that contain this rare field code cause the converter to time out. To quickly check if a document contains such a field code, press CTRL-A to select all text and then press F9 to refresh all field codes. If a dialog box shows up asking for text to be entered then your document contains an ASK field code. Please remove it before conversion.
The MS-Word converter is the only converter with the ability to automatically generate PDF Bookmarks.
Although in general the converted InfoPath files look good, character spacing may be less than optimal. As a workaround try to use different fonts or a separate Print View.
Excel sheets that contain no data cannot be converted to PDF format.
Read the announcement to see what is new in this version.
When an InfoPath form contains a number of externally referenced large images then the PDF Conversion may be carried out before these images finish loading. As a workaround use smaller images or embed the images inside the InfoPath form.
Documents that have been encrypted and secured via Microsoft's DRM solution are not supported at this moment in time.
InfoPath ships with a dialog box that allows the user to select which views (multiple) are printed when a form is sent to the printer. In InfoPath 2007 this functionality is ignored when generating PDF files, however in InfoPath 2010 these views are given priority over Muhimbi's own dynamic view selection functionality. If you wish to use Muhimbi's dynamic view selection features in combination with InfoPath 2010 then please make sure no views are selected in InfoPath's Print Multiple Views dialog. We hope to find a more permanent workaround for a next software release.
The PDF Converter allows transparency settings to be specified for entire watermarks as well as individual watermark elements. Some PDF Readers do not always interpret transparency of elements correctly. You may need to move your transparency settings from the watermark container to the individual elements.
When using the beta version of Visio 2010 to convert Visio files that contain macros, the file will fail to convert. As a workaround remove the macro or use Visio 2007 to convert these kind of files.
MS-Word documents that contain this rare field code cause the converter to time out. To quickly check if a document contains such a field code, press CTRL-A to select all text and then press F9 to refresh all field codes. If a dialog box shows up asking for text to be entered then your document contains an ASK field code. Please remove it before conversion.
The MS-Word converter is the only converter with the ability to automatically generate PDF Bookmarks.
Although in general the converted InfoPath files look good, character spacing may be less than optimal. As a workaround try to use different fonts or a separate Print View.
Excel sheets that contain no data cannot be converted to PDF format.
Read the announcement to see what is new in this version.
When an InfoPath form contains a number of externally referenced large images then the PDF Conversion may be carried out before these images finish loading. As a workaround use smaller images or embed the images inside the InfoPath form.
Documents that have been encrypted and secured via Microsoft's DRM solution are not supported at this moment in time.
InfoPath ships with a dialog box that allows the user to select which views (multiple) are printed when a form is sent to the printer. In InfoPath 2007 this functionality is ignored when generating PDF files, however in InfoPath 2010 these views are given priority over Muhimbi's own dynamic view selection functionality. If you wish to use Muhimbi's dynamic view selection features in combination with InfoPath 2010 then please make sure no views are selected in InfoPath's Print Multiple Views dialog. We hope to find a more permanent workaround for a next software release.
The PDF Converter allows transparency settings to be specified for entire watermarks as well as individual watermark elements. Some PDF Readers do not always interpret transparency of elements correctly. You may need to move your transparency settings from the watermark container to the individual elements.
When using the beta version of Visio 2010 to convert Visio files that contain macros, the file will fail to convert. As a workaround remove the macro or use Visio 2007 to convert these kind of files.
MS-Word documents that contain this rare field code cause the converter to time out. To quickly check if a document contains such a field code, press CTRL-A to select all text and then press F9 to refresh all field codes. If a dialog box shows up asking for text to be entered then your document contains an ASK field code. Please remove it before conversion.
The MS-Word converter is the only converter with the ability to automatically generate PDF Bookmarks.
Although in general the converted InfoPath files look good, character spacing may be less than optimal. As a workaround try to use different fonts or a separate Print View.
Excel sheets that contain no data cannot be converted to PDF format.
Read the announcement to see what is new in this version.
When an InfoPath form contains a number of externally referenced large images then the PDF Conversion may be carried out before these images finish loading. As a workaround use smaller images or embed the images inside the InfoPath form.
Documents that have been encrypted and secured via Microsoft's DRM solution are not supported at this moment in time.
InfoPath ships with a dialog box that allows the user to select which views (multiple) are printed when a form is sent to the printer. In InfoPath 2007 this functionality is ignored when generating PDF files, however in InfoPath 2010 these views are given priority over Muhimbi's own dynamic view selection functionality. If you wish to use Muhimbi's dynamic view selection features in combination with InfoPath 2010 then please make sure no views are selected in InfoPath's Print Multiple Views dialog. We hope to find a more permanent workaround for a next software release.
The PDF Converter allows transparency settings to be specified for entire watermarks as well as individual watermark elements. Some PDF Readers do not always interpret transparency of elements correctly. You may need to move your transparency settings from the watermark container to the individual elements.
When using the beta version of Visio 2010 to convert Visio files that contain macros, the file will fail to convert. As a workaround remove the macro or use Visio 2007 to convert these kind of files.
MS-Word documents that contain this rare field code cause the converter to time out. To quickly check if a document contains such a field code, press CTRL-A to select all text and then press F9 to refresh all field codes. If a dialog box shows up asking for text to be entered then your document contains an ASK field code. Please remove it before conversion.
The MS-Word converter is the only converter with the ability to automatically generate PDF Bookmarks.
Although in general the converted InfoPath files look good, character spacing may be less than optimal. As a workaround try to use different fonts or a separate Print View.
Excel sheets that contain no data cannot be converted to PDF format.
Read the announcement to see what is new in this version.
When an InfoPath form contains a number of externally referenced large images then the PDF Conversion may be carried out before these images finish loading. As a workaround use smaller images or embed the images inside the InfoPath form.
Documents that have been encrypted and secured via Microsoft's DRM solution are not supported at this moment in time.
InfoPath ships with a dialog box that allows the user to select which views (multiple) are printed when a form is sent to the printer. In InfoPath 2007 this functionality is ignored when generating PDF files, however in InfoPath 2010 these views are given priority over Muhimbi's own dynamic view selection functionality. If you wish to use Muhimbi's dynamic view selection features in combination with InfoPath 2010 then please make sure no views are selected in InfoPath's Print Multiple Views dialog. We hope to find a more permanent workaround for a next software release.
The PDF Converter allows transparency settings to be specified for entire watermarks as well as individual watermark elements. Some PDF Readers do not always interpret transparency of elements correctly. You may need to move your transparency settings from the watermark container to the individual elements.
When using the beta version of Visio 2010 to convert Visio files that contain macros, the file will fail to convert. As a workaround remove the macro or use Visio 2007 to convert these kind of files.
Regardless of the OS used (32 bit / 64 bit), always use the 32 bit version of Office 2010 on the document conversion server.
MS-Word documents that contain this rare field code cause the converter to time out. To quickly check if a document contains such a field code, press CTRL-A to select all text and then press F9 to refresh all field codes. If a dialog box shows up asking for text to be entered then your document contains an ASK field code. Please remove it before conversion.
The MS-Word converter is the only converter with the ability to automatically generate PDF Bookmarks.
Although in general the converted InfoPath files look good, character spacing may be less than optimal. As a workaround try to use different fonts or a separate Print View.
Excel sheets that contain no data cannot be converted to PDF format.
Read the announcement to see what is new in this version.
Documents that have been encrypted and secured via Microsoft's DRM solution are not supported at this moment in time.
InfoPath ships with a dialog box that allows the user to select which views (multiple) are printed when a form is sent to the printer. In InfoPath 2007 this functionality is ignored when generating PDF files, however in InfoPath 2010 these views are given priority over Muhimbi's own dynamic view selection functionality. If you wish to use Muhimbi's dynamic view selection features in combination with InfoPath 2010 then please make sure no views are selected in InfoPath's Print Multiple Views dialog. We hope to find a more permanent workaround for a next software release.
The PDF Converter allows transparency settings to be specified for entire watermarks as well as individual watermark elements. Some PDF Readers do not always interpret transparency of elements correctly. You may need to move your transparency settings from the watermark container to the individual elements.
When using the beta version of Visio 2010 to convert Visio files that contain macros, the file will fail to convert. As a workaround remove the macro or use Visio 2007 to convert these kind of files.
Regardless of the OS used (32 bit / 64 bit), always use the 32 bit version of Office 2010 on the document conversion server.
MS-Word documents that contain this rare field code cause the converter to time out. To quickly check if a document contains such a field code, press CTRL-A to select all text and then press F9 to refresh all field codes. If a dialog box shows up asking for text to be entered then your document contains an ASK field code. Please remove it before conversion.
The MS-Word converter is the only converter with the ability to automatically generate PDF Bookmarks.
Although in general the converted InfoPath files look good, character spacing may be less than optimal. As a workaround try to use different fonts or a separate Print View.
Excel sheets that contain no data cannot be converted to PDF format.
Read the announcement to see what is new in this version.
Documents that have been encrypted and secured via Microsoft's DRM solution are not supported at this moment in time.
InfoPath ships with a dialog box that allows the user to select which views (multiple) are printed when a form is sent to the printer. In InfoPath 2007 this functionality is ignored when generating PDF files, however in InfoPath 2010 these views are given priority over Muhimbi's own dynamic view selection functionality. If you wish to use Muhimbi's dynamic view selection features in combination with InfoPath 2010 then please make sure no views are selected in InfoPath's Print Multiple Views dialog. We hope to find a more permanent workaround for a next software release.
The PDF Converter allows transparency settings to be specified for entire watermarks as well as individual watermark elements. Some PDF Readers do not always interpret transparency of elements correctly. You may need to move your transparency settings from the watermark container to the individual elements.
When using the beta version of Visio 2010 to convert Visio files that contain macros, the file will fail to convert. As a workaround remove the macro or use Visio 2007 to convert these kind of files.
Regardless of the OS used (32 bit / 64 bit), always use the 32 bit version of Office 2010 on the document conversion server.
MS-Word documents that contain this rare field code cause the converter to time out. To quickly check if a document contains such a field code, press CTRL-A to select all text and then press F9 to refresh all field codes. If a dialog box shows up asking for text to be entered then your document contains an ASK field code. Please remove it before conversion.
The MS-Word converter is the only converter with the ability to automatically generate PDF Bookmarks.
Although in general the converted InfoPath files look good, character spacing may be less than optimal. As a workaround try to use different fonts or a separate Print View.
Excel sheets that contain no data cannot be converted to PDF format.
Read the announcement to see what is new in this version.
The PDF Converter allows transparency settings to be specified for entire watermarks as well as individual watermark elements. Some PDF Readers do not always interpret transparency of elements correctly. You may need to move your transparency settings from the watermark container to the individual elements.
When using the beta version of Visio 2010 to convert Visio files that contain macros, the file will fail to convert. As a workaround remove the macro or use Visio 2007 to convert these kind of files.
Regardless of the OS used (32 bit / 64 bit), always use the 32 bit version of Office 2010 on the document conversion server.
MS-Word documents that contain this rare field code cause the converter to time out. To quickly check if a document contains such a field code, press CTRL-A to select all text and then press F9 to refresh all field codes. If a dialog box shows up asking for text to be entered then your document contains an ASK field code. Please remove it before conversion.
The MS-Word converter is the only converter with the ability to automatically generate PDF Bookmarks.
Although in general the converted InfoPath files look good, character spacing may be less than optimal. As a workaround try to use different fonts or a separate Print View.
Excel sheets that contain no data cannot be converted to PDF format.
Read the announcement to see what is new in this version.
When using the beta version of Visio 2010 to convert Visio files that contain macros, the file will fail to convert. As a workaround remove the macro or use Visio 2007 to convert these kind of files.
Regardless of the OS used (32 bit / 64 bit), always use the 32 bit version of Office 2010 on the document conversion server.
MS-Word documents that contain this rare field code cause the converter to time out. To quickly check if a document contains such a field code, press CTRL-A to select all text and then press F9 to refresh all field codes. If a dialog box shows up asking for text to be entered then your document contains an ASK field code. Please remove it before conversion.
The MS-Word converter is the only converter with the ability to automatically generate PDF Bookmarks.
Although in general the converted InfoPath files look good, character spacing may be less than optimal. As a workaround try to use different fonts or a separate Print View.
Excel sheets that contain no data cannot be converted to PDF format.